供應烘干成套設備武漢院硅酸鈣板設備武漢院硅酸鈣板設備武漢院硅酸鈣板生產線抄取硅酸鈣板設備

信息詳情

烘干成套設備 DRYING? EQUIPMENT 技術指標：烘干窯采用鏈接條輸送產品，產品在通道內隨著傳送鏈板叉的驅動。
分別經過預熱區，干燥區和冷卻區三個階段。
整個烘干窯采用標準模樓的箱體組裝而成。
烘干窯四周用保溫棉保溫，盡可能減少箱體的散熱，烘干窯所用的熱源來源于鍋爐蒸汽，經過空氣散熱器，分散強制打入，熱風循環。
前部兩側面設有排濕口，風機處設有補風口，使窯內形成所需的氣流。
溫度和濕度的環境，從而達到產品快速而又安全干燥的目的。
溫度可由室內溫至120゜C，主鏈采用擺線針減速電機控制傳動速度，并用變頻器集中調控干燥周期。
質量指標：板面干燥均勻、無變形、出窯板水份含量0.8％。
板坯規格：2450mmx1230mmx6mm—12mm板產量：?? 6件/min?? 6mm厚指標 用電功率： 54kw 蒸氣壓力：0.8—1Mpa 窯體尺寸：36000mm（長）x4000mm（寬）x3300mm（高） Technical specification: Drying kiln will convey product with chain,product is driven by conveying scraping belt from preheating area,drying area and cooling area.The drying kiln is assembled by standard tank .it is coated with thermal insulation cotton to reduce heat waste. Drying kiln is heated with steam from boiler; hot wind is recycling inside kiln sfter the air radiator. Moisture outlets are arranged on the two sides in the front of kiln, and wind inlets are near the fan, which guarantees wind needed inside kiln. Temperature can be changed from room conce*ates on co*olling drying cycle. Quality standard:board is dry evnly,water content is 0.8％. Specification of board: 2450mmx1230mmx6mm—12mm Capacity:6units/min6mmboard Power:54kw Pressure of steam: 0.8-1Mpa Form factor:36000mm(Length)x4000mm(width)x3300mm(Height) ? ? 標簽： ? ? 蘇州市成套設備 ? 蘇州市成套設備廠家