HOLPOSON® Crisp Man：40～ 160g/L

軋液率：70％

一浸一軋 → 烘干(110℃×1～3 分鐘) → 定型(150-160℃×1～2 分鐘)

產品性能

1. 整理后的衣物有良好的防皺免燙效果，提高織物的折皺回復能力；
2. 整理后的織物手感柔軟；
3. 整理后的織物有很好的耐水洗效果；
4. 整理后的織物有很好的防縮效果。
   

注意事項

1. 整理前的織物應保持潔凈，沒有雜質，使織物有較好的吸濕性；
2. 由于樹脂反應需要在酸性催化條件下, 建議將被整理的織物布面的pH調整至中性范圍內，不可使布面偏堿性；
3. 處理樹脂前請根據工廠的設備及其它條件，進行必要的試驗。
   以防影響織物的強力及色光；
4. 化料時用溫水（約 30- 40℃），可保證產品良好的加工穩定性和持久效果。
   

貯    存

HOLPOSON® Crisp Man   包裝：25KG、60KG的塑料桶，貯存期為 12 個月。
                                                                 室內存放，避免高溫、嚴寒。

重 要 聲 明：以上數據和結果基于浙江福爾普生新型材料有限公司目前擁有的認識和經驗,以及受限的實驗室條件,僅供 參考，敬請客戶根據自身?xiàng)l件通過試驗加以確認。
本公司不承擔未經小樣確認而投入生產所造成的損失！

 src="

Crease-Resist Finishing Agent

HOLPOSON® Crisp Man

The crease-resist finishing agent HOLPOSON® Crisp Man is suitable for cotton, viscose, polyester and other fabrics. The finished fabric has crease-resist and non-iron functions and will not cause other problems, such as yellowing.

HOLPOSON® Crisp Man crease-resist finishing agent is mainly used in home textile, curtains, household materials,shirts and other clothing. It can achieve the effect of crease-resist, and the loss of strength is lower than that of ordinary crease-resist products.

Physical & chemical properties:             

Appearance: Milky white yellowish liquid

Solubility:   Dilutable in any proportion

Compatibility: Can be mixed with most finishing agents.

When mix-used with other auxiliaries, it is recommended to test first.   

Usage:

General dosage in padding method:

HOLPOSON® Crisp Man: 40-160g/L

Liquid retention rate: 70%

Dip and roll once, drying at 110 ℃ for 30 seconds. Heat setting at 150-160 ℃ for 1-2 minutes.

Characteristics:

1. The finished clothes have good crease-resist and ironing-free effect. Improves the crease recovery ability of the fabric;
2. The finished fabric is soft;
3. The finished products have good wash durability;
4. The finished fabric has good shrinkage resistance.

Attentions:

1. The fabric should be kept clean before finishing. Without impurities, fabric has better moisture absorption;
2. Because the resin reaction needs to be catalyzed by acid, it is suggested to adjust the pH value of the fabric surface to the neutral range, and do not make the fabric surface alkaline;
3. Please conduct necessary tests according to the plant equipment and other conditions before the finishing process in case of affecting the strength and color of the fabric;
4. Warm water (about 30-40 ℃) is used when dissolving to ensure good processing stability and lasting effect of the product.

Storage:

Holposon ® Crisp Man packaging: 25kg/60kg per plastic bucket. The storage period is 12 months. Store indoor to avoid overheat and severe cold.