銀離子抗菌劑HOLPOSON® AG+

HOLPOSON® AG+主要應用于家紡、服裝、墻布、窗簾、地毯、軍工等紡織品面料后整理加工工藝，整理抗菌后的紡織品能有效抑制細菌在紡織品表面滋生，破壞微生物的代謝過程，減少微生物繁殖引起的氣味，使紡織品具有抗菌防護功能，防止織物產生霉斑，提高紡織品的使用周期。

 src="

一、物化性能             

外  觀 ：透明液體       

成  分 ：絡合銀化合物                            

溶解性： 分散于水

離子性： 陽離子           

二、使用方法

1首先稱取銀離子抗菌劑HOLPOSON@ AG+，攪拌加水，然后逐漸稀釋到加料缸。

按照如下生產工藝進行生產：

浸軋法

HOLPOSON@  AG+         20-40g/l

PH值                   約5-6

軋余率                  約70%

工藝流程：110℃烘干--定型150℃180秒或者160℃150秒

HOLPSOON@ AG+ 可以配合防水劑使用，詳情咨詢我公司技術中心

產品性能

1.具有較高安全性，皮膚接觸安全。

2.使紡織品具有持久的衛生清新和舒適透氣性能

3.本品不含有機鹵素（AXO），無毒，對皮膚無刺激，符合REACH法規和OEKO-TEX 100相關規定

注意事項

1.用冷水或溫水（30­40度）逐漸化料溶解于水

2.如使用一部分助劑，如陽離子助劑，務請通過預備試樣確認穩定性。

3.對白織物建議進行實驗；可能會對白度有影響。
對熱遷移性能無影響或僅有微小影響

4.為了檢測與其他產品的相容性建議進行預先實驗或請另外單獨咨詢我司技術人員

貯    存

HOLPOSON® AG+ 包裝：25KG 塑料桶，貯存期為12個月。
                                                                    室內存放，避免高溫、嚴寒。

 src="

Silver Ion Antibacterial

Finishing Agent

HOLPOSON® AG+

HOLPOSON® AG+ is mainly used in the finishing process of home textiles, clothing, wall coverings, curtains, carpets, military and other textile fabrics. The antibacterial textiles can effectively inhibit the growth of bacteria on the textile surface, destroy the metabolic process of microorganisms, and reduce the causes of microbial reproduction. The smell makes the textiles have antibacterial protection function, prevents mildew on the fabrics, and improves the life cycle of the textiles.

Physical & chemical properties:             

Appearance:   Transparent liquid

Composition:  Complex silver compound

Solubility:     Dispersable in water

Ionicity:       Cationic

Usage:

1. First weigh and take the silver ion antibacterial agent HOLPOSON® AG+, stir and add water, and then gradually dilute it in the feeding tank. Production should be carried out according to the following production process:

Padding

HOLPOSON® AG+: 20-40g/L

pH value: About 5-6

Liquid retention rate: About 70%

Process: 110 ℃, heat setting at 150 ℃ for 180 seconds or 160 ℃ for 150 seconds

HOLPOSON® AG+ can be used with waterproof agent. Please consult our technical center for details.

Characteristics:

1. It is highly safe and is safe to touch the skin.
2. It gives a lasting feeling of clean, freshness and comfort.
3. This product does not contain organic halogen (AXO). It is non-toxic and non-irritating to the skin. It complies with REACH and OEKO-TEX 100

                                                                         Attentions:

1. Use cold ice or warm water (30-40 ℃) to gradually dissolve the material in water.
2. If some agents such as cationic agents are used. Please confirm the stable plan through tests of prepared samples.
3. It is suggested to carry out experiments on white fabrics, which may have an impact on whiteness. There is no or only slight effect on the heat transfer performance
4. In order to test the compatibility with other products, it is recommended to carry out preliminary experiment or consult our technical personnel separately.

Storage:

HOLPOSON® AG+ package: 25kg/plastic barrel. Storage period: 12 months. Keep indoor and avoid overheat and severe cold.